hey guys i'm new to the forum and a nice forum it is i'm having trouble replacing the waterpump so far i can't get the motor mount out its seized to the frame i got them off the block but i can't wiggle the mount out anyways i know there are 2 bolts behind the mount that got to come out i removed 1 via the little hole through the mount the second bolt below it i got it loose but i can't pull it out because of lack of clearance through the motor mount , i removed all the other bolts around the water water pump except for 1 bolt which is right behind where the tension-er is how in the hell do you get that bolt out? do you have to remove the alternator and the bracket below it? any help please would be greatly appreciated.onfuse d:onfuse d:onfuse d:onfuse d:onfuse d:

This is a series 2 but should still be very close. There'* a bolt under the tensioner that you may have missed. Run your hand along the edge of the pump looking for all the bolts. The pump will also stick a bit so ther emay be soem effort to crack it loose.

yes there is a bolt behind the tensioner but how do you remove that bolt the tensioner bracket is in the way?

You will need to remove the tensioner. I suggest picking up a new set of coolant elbows. They only run about $5 for the set.

and remove the bracket that holds the tensioner?

Yes, it all comes off in one piece. I believe that are 3 bolts holding it in place.

is there a how to guide step by step for changing a waterpump on a 94 bonne ssei?