can anyone tell me where on the net i can get some good bushing to replace the dried out busted up ones that are currently under my car. I noticed some poping noise and jacked her up. the bushing for the front sway bar were crumbling, i am thinking i should just replace all the bushing. I will probably do the struts too at the same time. I didn't know if there was a package deal you guys know about.

thanks

Read this thread:

http://www.bonnevilleclub.com/forum/...rgy+suspension

I have the part numbers in there for the swaybar endlink bushings. I strongly reccomend you upgrade to the Energy Suspension version. They get rid of the boaty feeling and offer a much tighter feel.

Actually the long but super informative thread is this one

The Ringy Dingy Endlink Thread

It pretty much comes down to 8105 and 8120 Energy Suspension bushings found at Autozone'* and other parts stores. For the rears the bolts can be replaced with factory replacement botls obtained at your dealer or Grade 8 hardened 3.5" x 3/8 botls with Nylock insert acorn nuts.

Does anyone know if 2000 ssei would be same as far as links.

if you need any help changing the endlinks, im close to you, and be happy to help ya out

I have no idea if 00 is the same or not. Probably. Put it up and take a few pics for us.

yeah it looks like you have done a lot to your car and i am just getting started with this one. so where are you located, shot me an email with you phone number and i will give you a call.

btw: i called autozone and napa looking for those bushing and those people couldn't find a hole in the ground. had no idea what i was looking for and didn't want to put forth and effort to try. will try again tomorrow.