3rd brake light
My 3rd light isnt working all the time, once in a while it will show me that the 3rd light is not working then i drive a little more and it goes on then again off then again on i think it might be a connection somewhere i just dont know whether its the wires or the bulb holder. i nkow its not the bulb i had already changed it
|
Make sure you use the right bulb. I was in a situation where the only bulb available was an RV 12 volt bulb with the same base. Damn light monitor knew the difference even though the light worked :oops:
Other than that, just check your connections. If you used the right bulb (1156) then you can only check your connections. |
Re: 3rd brake light
Originally Posted by bonni21
My 3rd light isnt working all the time, once in a while it will show me that the 3rd light is not working then i drive a little more and it goes on then again off then again on i think it might be a connection somewhere i just dont know whether its the wires or the bulb holder.
If you rework the contacts just a teensy bit for a snug grip on the bulb, it should be fine. |
Thanks for the thread....that's been going on with mine for a while...Lamp Monitor always telling me one is out...but wasn't...sure nuff...trunk light socket...thanks again :lol: :lol: :lol:
|
3rd brake light
great just what i was thinking of doing i tried once by putting in foil but that didnt work cuz as i found out few days later my whole brake system was out due to burned out fuse. Thnx ill try that out cuz the side contact actually is broken on mine so i hope foil will fix ne one know how much the socket costs?
|
use a soldering iron, they work alot better than anything else you can possibly do to it, short of replacing the wiring.
|
All times are GMT -4. The time now is 07:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands