i read my cel codes and 22 , 23 and 41 came up 41 is the cam sensor and 22 is tps low voltage, 23 is IAT low temp. could some one please give me an idea of the symtioms of these problems. what would it be doing

Check IAT is plugged in(it is under your air filter box)
Check TPS voltage( do a search and youll find out how)
Cam sensor is under water pump to left, check wiring in harness is good, clean connection to cam sensor and use diaeletric grease.To take sensor out it is just 1 10mm bolt I think and in the hole sensor came out you need a flash light and mirror to see if cam sensor magnet is there.I show a picture in my post (couple o codes)
Keep one post for one topic.

what one could be causeing my car to stall when its hot out it fires right back up and runs fine but stalls every ounce in a while

Set the TPS voltage first, then remove and clean the IAC motor. Check all elctrical connections including the battery and grounds.

i have a throttle position senor and i iac valve as extra peices all you have to do is mail me $5 for shipping.. they both work. i just put everything new on my 88 sse about a month ago. i did a tune-up and a half.. i went crazy replacing everything....lol