More Problems *****FIXED***** Read for Update
#31
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2004
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
When I first got it I disconnected a terminal to reset the computer after i replaced the cam sensor. No go. I have never had a dead battery
Yesterday when I put the new interruptor in, I unhooked the terminal. Then this morning I put it all back together and screwed the terminal back in. The service engine soon light wasnt on and the stalling problem was completely gone!
Yesterday when I put the new interruptor in, I unhooked the terminal. Then this morning I put it all back together and screwed the terminal back in. The service engine soon light wasnt on and the stalling problem was completely gone!
#33
Guest
Posts: n/a
I was going to try and explain..
http://www.bonnevilleclub.com/forum/...=439691#439691
The Cam sensor/Interupter thread...
I doub't that it was stalling so bad before they dissconnected the battery...
When a Code 41 sets, the ECM uses the last known cylinder #1 TDC reference, or the last SFI reference pulse... With no idea what or where the fuel pulse is the car will not run worth a ****...
Oh well...lol... I'll leave that one alone
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
The Cam sensor/Interupter thread...
I doub't that it was stalling so bad before they dissconnected the battery...
When a Code 41 sets, the ECM uses the last known cylinder #1 TDC reference, or the last SFI reference pulse... With no idea what or where the fuel pulse is the car will not run worth a ****...
Oh well...lol... I'll leave that one alone
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
#34
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2004
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Well, it was stalling all the time before I fixed it. Now that it'* fixed it doesnt stall anymore. Im willing to bet it was the interruptor.
BTW, No bonneville will get as good mileage as a diesel 4cyl VW. Sorry
Edit: I asked my father if he disconnected the battery while it was stalling and he said he disconnected it many times to reset the ECM and it didnt do much.
BTW, No bonneville will get as good mileage as a diesel 4cyl VW. Sorry
Edit: I asked my father if he disconnected the battery while it was stalling and he said he disconnected it many times to reset the ECM and it didnt do much.
#35
Senior Member
Posts like a Camaro
Join Date: Jan 2003
Location: Jenison, MI (Near Grand Rapids)
Posts: 1,070
Likes: 0
Received 0 Likes
on
0 Posts
What Don is trying to say is that when a cam sensor fails, the computer falls back to what it remembers as being right, and that works okay, but not great. When you pulled a battery terminal, it lost that memory. With no signal from the cam sensor, it ran like crap and stalled, most likely worse than it had before. That'* all he'* saying.
Highway mileage though would be similar between a gas VW 4-cyl and a Bonneville. No, a Bonneville won't get the same mileage as a VW diesel. Then again, a VW diesel isn't exactly a car that I'd want to drive/own...
But to each his own. Glad you got the Bonneville fixed.
Highway mileage though would be similar between a gas VW 4-cyl and a Bonneville. No, a Bonneville won't get the same mileage as a VW diesel. Then again, a VW diesel isn't exactly a car that I'd want to drive/own...
But to each his own. Glad you got the Bonneville fixed.
#36
Member
Posts like a V-Tak
Thread Starter
Join Date: Jun 2004
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
My old VW Golf got about 30-34mpg. I havent been able to get better than 22-24mpg with my bonneville, but it could be the way I drive it. Either way, smaller engine smaller car is going to get better mileage, whether its a Gas or Diesel. Plus there is less to go wrong on a older VW. Either way im going to sell my bonneville now that I have everything fixed. Im going to start at $1000.00 obo. Does that seem fair?
#37
Senior Member
Posts like a Camaro
Join Date: Jul 2003
Location: Orlando, Florida
Posts: 872
Likes: 0
Received 0 Likes
on
0 Posts
"It stalls when I start to slow down, usually at 40mph or under. The RPM needle will drop quickly to 1,000, then to 400ish, then stall."
That sounds more like a gummed up IAC. Varying idle speed is another sign but where I would look first.
Have decided to let my son use the Bonne until he finishes school, the a/c died on his Grand Am and is not really worth putting a lot of money into it. Was having trouble considering selling anyway, have had since new and am attached to it.
That sounds more like a gummed up IAC. Varying idle speed is another sign but where I would look first.
Have decided to let my son use the Bonne until he finishes school, the a/c died on his Grand Am and is not really worth putting a lot of money into it. Was having trouble considering selling anyway, have had since new and am attached to it.
Thread
Thread Starter
Forum
Replies
Last Post