I need help!!!
#1
Junior Member
Thread Starter
Join Date: Mar 2009
Location: Honesdale pa.
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I need help!!!
I have a 1987 boneville and it sputters from a stand still, i have a vaccume leak from a plastic box on the firewall i want to know if this will cause that and what is the box called so i can get a new one im posting a pic of a similar one. thanks 4 all the help...
Victor:
confused:
Victor:
confused:
#4
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Well, that'* a older car. Your best bet will be a local salvage yard. There is a chance someone is parting out a car in the for sale section. Have you looked there? You can also try Auto Parts Fast at RockAuto and see if they have it there.
#6
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Is it the vacuum line that'* bad, or is it the nipple on the box? You could possible repair it. If it'* the line you can get generic vacuum lines at auto parts stores. If the nipple is broken off, perhaps you can get a metal replacement nipple, drill out the broken nipple and thread in a new one.
#8
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Then what I would do is go to your local parts store and see if they have screw in nipples. You may be able to just twist that in the hole, might need to drill it out. Put a small dab of silicone on the outside to seal it, and all should be good, and far cheaper fix then buying a new box.