Does `94 crankshaft pulley fit onto `87?
#1
Junior Member
Thread Starter
Join Date: Jul 2004
Location: Estonia
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Does `94 crankshaft pulley fit onto `87?
that`* the answer, I really need to know. and also the ignition sensor (I hope that`* the right name?), does it fits too?
thank You!
thank You!
#3
Junior Member
Thread Starter
Join Date: Jul 2004
Location: Estonia
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Oh, now I have a question again about this subject.
Does the other GM 3.8 V6 crankshaft pulleys fit to Pontiac`*? Like for example: Olds Delta 88, Buick Le Sabre etc. `87-`91?
And the same question about the crank sensor too.
Does the other GM 3.8 V6 crankshaft pulleys fit to Pontiac`*? Like for example: Olds Delta 88, Buick Le Sabre etc. `87-`91?
And the same question about the crank sensor too.
#5
Senior Member
Posts like a Camaro
Join Date: Jul 2003
Location: Orlando, Florida
Posts: 872
Likes: 0
Received 0 Likes
on
0 Posts
Talking about log vs "snakes" manifold ? Through "C" 3800 (last used 1991), the balancer/pulley was a slip fit on a straight snout. "L" (most 1991 and later) uses a press fit on a tapered snout. Not interchangable.
Understand that (haven't seen one) that the '87 "3" and earlier 3.8 engines used a single ring crank sensor, later 3800s use dual ring sensors.
Understand that (haven't seen one) that the '87 "3" and earlier 3.8 engines used a single ring crank sensor, later 3800s use dual ring sensors.
Thread
Thread Starter
Forum
Replies
Last Post
russianpolarbear
Your Ride: GM Pictures & Videos
26
06-19-2003 11:06 AM