couple o codes Help new update.
#11
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Nov 2005
Location: Hamilton, Ontario , Canada
Posts: 1,201
Likes: 0
Received 0 Likes
on
0 Posts
I thought I had this fixed a couple times to no avail.Today I played around again after reading many posts on CpS.Last night I drove a good 15 miles with about 5 or 6 good starts then after thinking shes fixed I came to a stop sign and it stalled, started up ok next stop sign stall , the idle did surge abit after start.I started to put it in neutral at next couple of stop signs and it didnt stall.Got me home .
Today I had 5 or 6 good starts and a short run with no problems with cam sensor disconnected dont really know what this does but I read in a post to try this.
SES light is intermittant only on stall and not always .Never stays on butcode 41 is still there if I read it.
I know the cam magnet is there
I havent changed sensor yet but it is cleaned up and connections as well as harness wires are clean and have diaeltric grease.
Please help. Thanks
Today I had 5 or 6 good starts and a short run with no problems with cam sensor disconnected dont really know what this does but I read in a post to try this.
SES light is intermittant only on stall and not always .Never stays on butcode 41 is still there if I read it.
I know the cam magnet is there
I havent changed sensor yet but it is cleaned up and connections as well as harness wires are clean and have diaeltric grease.
Please help. Thanks
#12
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Nov 2005
Location: Hamilton, Ontario , Canada
Posts: 1,201
Likes: 0
Received 0 Likes
on
0 Posts
Well cam sensor code is gone but I have a new code 42 EST.I have taken all connections from harness apart and cleaned (dieletric grease)and taped areas.I cleaned TB , iac AND egr with TB cleaner and cleaned connections.I decided to change my computer out with a spare I had and car seemed to run great for a couple days, today its running good except for a couple stalls when stopped at lights.I am starting to think I have a issue with muffler or cat as my exhaust has a deeper drone now.Could a plugged cat cause stalling?Also checked coils and they read okay , but possibly might be module can that be tested, it is a delco.
UPDATE - I put my magnavox back on to eliminate module.
UPDATE - I put my magnavox back on to eliminate module.
Thread
Thread Starter
Forum
Replies
Last Post
Dutch2005
Everything Electrical & Electronic
2
09-30-2006 11:45 PM