I once again.. need your help. Anyone who has their service manual from 87-91, I will need them to turn to page 6E3-A-45. On that page, you will see on the bottom, left hand corner, at "diagnostic aid" table. Tell me if your'* is the same as mine, if so, just say it is, if not, please enter the data you see.


210 F/100C - 185OHMS
160F/70C - 450OHMS
100F/38C - 1,800OHMS
70F/20C - 3,400OHMS
40F/4C - 7,500OHMS
20F/-7C - 13,500OHMS
0F/-18C - 25,000OHMS
-40F/-40C - 100,700OHMS


-justin

http://www.bonnevilleclub.com/techinfo/?article=87

87 FSM, that'* showing me a DTC 21 TPS. I bet you mean MAT tho.... 6E3-A-49 But the table is the same.

90 FSM - same table on page -47

Okay, thanks guys. I see we all have the same OHM rating for our temps. Is the sensor itself the same, like could I go to AZ and grab one from any 3800 S1 or S2? Mine just has one wire going to it.. and it is located under the TB, and quite hard to locate without a flashlight [at least for my LN3]


-justin