Quad Driver Mod A Circuit
#1
Quad Driver Mod A Circuit
Right, I did a code check on my 89 SSE, I came up with code 26, look that up it says its a Quad Driver Module A Circuit, someone wanna tell me what that is? Thanks
#3
Senior Member
Posts like a Camaro
Join Date: Jul 2003
Location: Orlando, Florida
Posts: 872
Likes: 0
Received 0 Likes
on
0 Posts
Quad drivers are amplifier circuits. On the "C" engine #1 handles the SES light and canister purge solenoid. #2 the a/c and cooling fans relays, #3 the HOT light and TCC solenoid, and #4 the three EGR circuits. Factory Service manual has several pages of diagnosis. Note: code 26 sets because an electrical fault was detected (e.g. loose ERG connector). It will not set on a mechanical fault (e.g. stuck ERG).
If the SES light is acting properly, lockup is occurring, and the cooling fans are on with A/C then it is probably the EGR circuit.
If the SES light is acting properly, lockup is occurring, and the cooling fans are on with A/C then it is probably the EGR circuit.
Thread
Thread Starter
Forum
Replies
Last Post
riotact
Performance, Brainstorming & Tuning
6
06-22-2003 07:11 PM