LIM porting tips
05-09-2008, 12:30 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2007
Location: Oceanport, NJ
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
LIM porting tips
Now that LeSabre'* done with his LIM porting job i've picked up his old LIM and plan to do the same. I have a friend that is pretty handy with this kinda stuff, he makes pretty good money porting out throttle body'* for camaro'*, and i as just wondering if any one had any tips i could give him to make the process go along more smoothly.
05-09-2008, 12:43 PM
#2
Junior Member
Posts like a Ricer Type-R
Target width: .85"
Target height: 1.85"
Don't OVER PORT! Make your 3 corners the same radius as the head ports.
Smooth out the bumps and flaws, and don't POLISH anything. You're pretty much just taking the rough casting from the high spots down to the lows.
Target height: 1.85"
Don't OVER PORT! Make your 3 corners the same radius as the head ports.
Smooth out the bumps and flaws, and don't POLISH anything. You're pretty much just taking the rough casting from the high spots down to the lows.
05-09-2008, 02:33 PM
#4
Senior Member
True Car Nut
Join Date: Feb 2003
Location: Philly
Posts: 4,508
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by the crunge
So dont actually Port out the holes just fix them and make them even?
Thread
Thread Starter
Forum
Replies
Last Post
Speedster400
Performance, Brainstorming & Tuning
6
11-07-2007 09:51 AM
agrazela
Performance, Brainstorming & Tuning
66
04-06-2007 12:48 PM
agrazela
Performance, Brainstorming & Tuning
20
02-02-2007 01:04 PM
SSEimatt93
Detailing & Appearance
11
08-21-2006 07:19 PM