gutting the cat
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Sep 2003
Location: knoxville tn
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
gutting the cat
i'm in tennessee wheres theres no emission laws other than if it came with it it should have it. i was thinking bout putting my bonny on my dads lift at work takeing the cat off knocking the crap out inside it. then take a peice fo pipe and weld to the inside of it then slap it back on. this way i would never have to buy another $100 cat. seeing that this sucker has never been off to my thinkin and with 145,000 miles i think it needs changed or my idea
now the bad side to this from what yall say is the loss of low end torq from the loss of backpressure. whats the opinions on gutting the cat?
now the bad side to this from what yall say is the loss of low end torq from the loss of backpressure. whats the opinions on gutting the cat?
#4
Senior Member
Posts like a Northstar
Join Date: Aug 2003
Location: Buffalo Grove, IL
Posts: 666
Likes: 0
Received 0 Likes
on
0 Posts
Nm, the other thing being I think a straight pipe will not create enough backpressure. Ask some of the other members, they can tell you for sure.
#7
Junior Member
Posts like a Ricer Type-R
Click on Profile on the top right corner of the screen, and fill in your signature.
DISCLAIMER:
THE OWNERS/ADMINISTRATORS OF THIS SITE DO NOT RECCOMMEND THE REMOVAL/MODIFICATION OF EMISSIONS CONTROL DEVICES ON MODERN CARS. WE WILL NOT BE HELD LIABLE FOR ANY SUCH ACT BY ANY MEMBER HERE, NOR DO WE CONDONE IT. FEDERAL LAW, REGARDLESS OF WHICH STATE YOU RESIDE IN, PROHIBITS THE MODIFICATION/REMOVAL OF ANY SUCH DEVICE.
That being said, I'd suggest a high-flow cat like I have. And many others here.
DISCLAIMER:
THE OWNERS/ADMINISTRATORS OF THIS SITE DO NOT RECCOMMEND THE REMOVAL/MODIFICATION OF EMISSIONS CONTROL DEVICES ON MODERN CARS. WE WILL NOT BE HELD LIABLE FOR ANY SUCH ACT BY ANY MEMBER HERE, NOR DO WE CONDONE IT. FEDERAL LAW, REGARDLESS OF WHICH STATE YOU RESIDE IN, PROHIBITS THE MODIFICATION/REMOVAL OF ANY SUCH DEVICE.
That being said, I'd suggest a high-flow cat like I have. And many others here.
#9
Senior Member
Posts like a 4 Banger
Join Date: Nov 2003
Location: Morris, Illinois
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
I don't personally agree with removing a converter since a car that doesn't have one puts out as much emissions as about 100 cars that do. However, it is possible that with the high mileage that he has, the converter isn't doing much anyway and could even be partially melted inside if the car was ever running rich for a long period of time.
The government only requires them to maintain factory emissions for 50,000 miles last I knew so at 145,000, who knows what good the converter is doing. OTH, they aren't that expensive to replace, even with high flow models.
The government only requires them to maintain factory emissions for 50,000 miles last I knew so at 145,000, who knows what good the converter is doing. OTH, they aren't that expensive to replace, even with high flow models.