this may be kinda a dumb question
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: May 2003
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
this may be kinda a dumb question
but is there a site or something that I cam look at to ma ke my car look unique?? not body kits and **** just stuff that might make it stand out a lil more
#2
Senior Member
Expert Gearhead
What do you have in mind? Lowering your car gives it a nice customize aggressive look, only go 1.5" or so. Of course rims and rubber are the single most effective way to modifiy the look of your car. Tints, higher end lighting, interior lighthing, racing stripes. It really depends on what you want to do.
Make a list of items that you want to address. At least then its easier to direct you to good sites. Are you more interested in the show? or the go?
Make a list of items that you want to address. At least then its easier to direct you to good sites. Are you more interested in the show? or the go?
#4
Senior Member
Expert Gearhead
If you wanna haul *** on a budget...without getting into major engine mods. I suggest
Cold Air Intake
Exhaust (Cat-back is all good)
PCM chip
Higher end ignition
Wires/plugs
Check out our vendors, they have lots of kick *** goodies for you. take a look at the links section for addresses
I'll let the other pros dance here for ya.
Cold Air Intake
Exhaust (Cat-back is all good)
PCM chip
Higher end ignition
Wires/plugs
Check out our vendors, they have lots of kick *** goodies for you. take a look at the links section for addresses
I'll let the other pros dance here for ya.
#5
Member
Posts like a V-Tak
Thread Starter
Join Date: May 2003
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
I had a question on exhaust earlier and what I ended up gettin out of it is on my 92 se I should get 2.5 in pipe high flow cat no resitnator with 80 series flowmaster
what do you think will it sound nice?? (not ricey)
what do you think will it sound nice?? (not ricey)
#6
Senior Member
Expert Gearhead
If you went with an 80 Series flowmaster with a 2.5' pipe with no res...you're laughing, it'll sound great. Not ricey at all.
I basically have the same system. High flow cat, 2.5" pipe, to a Magnaflow muffler. I also posted an audio clip of the exhuast to give an idea of how it sounds. At least it will give you an idea of what you can do with yours
I basically have the same system. High flow cat, 2.5" pipe, to a Magnaflow muffler. I also posted an audio clip of the exhuast to give an idea of how it sounds. At least it will give you an idea of what you can do with yours
#7
Senior Member
Expert Gearhead
Have a listen
http://jonathaneger.com/rumbly.wav
Let it load, then replay it at least 2. Its kinda low quality but you'll get the idea
http://jonathaneger.com/rumbly.wav
Let it load, then replay it at least 2. Its kinda low quality but you'll get the idea
#9
Senior Member
Expert Gearhead
My old school 1996 Canon Powershot 600 digital camera has audio recording capabilities. Just like some of the new cameras can record audio/video...well my cam is the grandpappy of digi cams.
The quality leaves something to be desired, but it gets the point across
The quality leaves something to be desired, but it gets the point across