key programming help needed
#1
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Jan 2009
Location: West Philly
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
key programming help needed
I recently purchased a 01 Auroura. I lost the key and went to the dealer and they looked it up by the vin and cut me another key. I puut the new key it works in all the locks and ignition. When I try to start it a message come up on the driver information saying starting disabled and security fault. I called the dealership and they said the key need to programmed to the car. Does anybody have the proper process on how to do this?
#2
Senior Member
True Car Nut
Join Date: Jan 2009
Location: Dover, NH
Posts: 7,122
Likes: 0
Received 0 Likes
on
0 Posts
put the original key in the ignition. start the car let it run for 10 - 15 seconds. shut it off and pull the key out, within a couple seconds put the new key in and start the car. let it run for 10-15 seconds shut it off the new key should be programmed
#9
Senior Member
Posts like a Supercharger
Thread Starter
Join Date: Jan 2009
Location: West Philly
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
Does anybody know if snaap on mhas a tech 2 scanner and if so can they give me a part # , I have friend that works for snap on who let me use some of their loaners
#10
Retired Senior Admin
Expert Gearhead
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
Not that I know of, but here you go, it has free shipping.
http://cgi.ebay.com/ebaymotors/GM-Te...motiveQ5fTools
http://cgi.ebay.com/ebaymotors/GM-Te...motiveQ5fTools