Ok so I have a miata, hold on before start throwing things... I gto a turbo kit for it, use some of kit and other purchased parts on kit so I have some left over. Here is my plan/ideas.
1.5 IHT turbo with 6.5 lbs internal waste gate
Breaded oil lines and connections 24 in and 18 return line
Exhaust manifold never used, will use flange from it for maifold on car
Older Volvo inner cooler small 6x 9 2 core 2in intake and out pipe
Fuel pressure regulator, raises fuel pressure as boost rises
GM 1.5 MAP sensore to use a boost reference point
Stewer Warner boost,fuel pressure, and egt with probe and weld on bung
Want to start small maybe none inner cooled just to see what it does, got this on paper just need some input, mainly on fuel pressure and system, will upgrade pump not sure what else.
Shop set up, just work there not mine...
Exhaut pipe benter
Other things used in a bodyshop grinders, ect...
So give me some feedback, will post some pics of equipment and ideas, Thanks MIke
92 bon, L motor SI ,20 in Chrome 245-40-20 tires, 5% tint,85 watts blue fog lights, 55 watts back up bulbs, tinted tail lamps,two tone paint, 12 kicker, 4x6 plates, 6 1/2 compnets in back deck. under car neon red, flow master, custom CIA, Blue headlamp bulbs.
97 Park Ave Ultra stock F41 under it.....!