S/C coulpler?!
#1
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
*/C coulpler?!
Could this be the problem i experience? When i rev the car up and it starts to click then u can hear something reving way up, even though the engine is only lightly being reved?
My mechanics teacher said its not a backfire, it sounds mechanical. (this is all done with the car is in park. When u rev it up in park the SC gage goes up, but not much at all.
My mechanics teacher said its not a backfire, it sounds mechanical. (this is all done with the car is in park. When u rev it up in park the SC gage goes up, but not much at all.
#2
Junior Member
Posts like a Ricer Type-R
No. The coupler will only be heard at idle.
Your PCM is dumping boost because you're not in gear. It'* not supposed to boost in P or N. Put it in gear, foot on the brake, then rev it.
Moving this to forced induction.
Your PCM is dumping boost because you're not in gear. It'* not supposed to boost in P or N. Put it in gear, foot on the brake, then rev it.
Moving this to forced induction.
#3
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
when you say its not supossed to boost in park or nuetral does this mean the gage needle should not move at all from -10 ? Cause mine goes up about 1/4 in park or nuetral when reved.