Changing SC bearings
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2009
Location: Mounds View, Minnesota
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Changing SC bearings
Im changing my coupler and bearings and was wondering if theres a write up on it like there is for the coupler.
#2
Senior Member
Posts like a Turbo
Join Date: May 2009
Location: OHIO
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
#3
Senior Member
Posts like a Turbo
Join Date: May 2009
Location: OHIO
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
It also would help to have a great machine shop with a press to take off and put on your new bearings just take your shaft with everything on it still so they can see what it looks like before the new ones get pressed back on. Best of luck to you.
#4
Senior Member
Posts like a Turbo
Join Date: May 2009
Location: OHIO
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
This will help some to....How to replace an M90 snout coupler without removing the entire blower
Don't forget to have a puller to remove your drive belt pulley.
Don't forget to have a puller to remove your drive belt pulley.
#6
Senior Member
Posts like a Turbo
Join Date: May 2009
Location: OHIO
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info Bill its good to know guy'* like you Dan and the others are here to offer all kinds of help and knowledge! Thanks you guy'* just ROCK!!!!!!! I am glad to be a part of this Awesome Forum......
#8
Senior Member
Posts like a Turbo
Join Date: May 2009
Location: OHIO
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
I would try here I think this is what you need to rent email them and ask though good luck.
ZZ Performance
ZZ Performance
Thread
Thread Starter
Forum
Replies
Last Post