help
#1
Junior Member
Thread Starter
Join Date: Sep 2006
Location: buffalo
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
help
hi guys i just joined the club.i have a bonneville 97 ssei.im going to ohio for a supercharger exchanged . i was wondering if i went with the 3.4 pully .how much extra would i get out of the car.the pully is 65 bucks extry. dont know if i should spend the money. thanks
#2
Junior Member
Posts like a Ricer Type-R
Spend it now, but don't put it on. You have additional work you need to do first, and should own a scantool or have access to one before you get the pulley. You need to know if you have any KR first, and after. You should also have a good CAI or FWI, 180° thermostat, and possibly PEM'* first. A custom PCM wouldn't hurt to take full advantage of it.
A pulley isn't a magic solution. There'* other work involved before each step down.
Out of curiosity, is this a private seller, or a retailer?
A pulley isn't a magic solution. There'* other work involved before each step down.
Out of curiosity, is this a private seller, or a retailer?
#7
Junior Member
Thread Starter
Join Date: Sep 2006
Location: buffalo
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
help
i know im new. toledo ohio, i found it on http://cgi.ebay.com/ebaymotors/GM-SU...QQcmdZViewItem
#9
Junior Member
Posts like a Ricer Type-R
Re: help
Originally Posted by chuckiec4
i know im new. toledo ohio, i found it on http://cgi.ebay.com/ebaymotors/GM-SU...QQcmdZViewItem
There are some ebay sellers that are purely rotten. Buyer beware.
Thread
Thread Starter
Forum
Replies
Last Post