Clearing my gauge needles
#1
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Nov 2002
Location: Arizona. Snowboarder. Happy Shredding.
Posts: 1,296
Likes: 0
Received 0 Likes
on
0 Posts
Clearing my gauge needles
So has anyone done this? I am in the process of clearing the needles and the plan is to actually tint them purple or blue. so far, i have only done the boost gauge. (cleared only). also, does anyone know how to get the speedo needle back on at the right scale? i put it back on...but it reads 10 mph faster than my HUD now...and i can't get it on right.
#5
Senior Member
True Car Nut
Join Date: Jan 2005
Location: Montevideo, MN MWBF '05, '06, '07 WCBF '06 '07 survivor
Posts: 3,882
Likes: 0
Received 0 Likes
on
0 Posts
I think his ears are full of bondo dust, he prolly won't respond to a yell. You might have to jump in between him and his new toy in a bikini to catch his attention.
#6
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Nov 2002
Location: Arizona. Snowboarder. Happy Shredding.
Posts: 1,296
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sonoma_zr2
I think his ears are full of bondo dust, he prolly won't respond to a yell. You might have to jump in between him and his new toy in a bikini to catch his attention.
#7
Senior Member
Certified Car Nut
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
i cleared the needles on the cluster....Haro never did IIRC...what do you need to know
what you need to do is have the clear plastic off the cluster and install it....then drive and manually install the needle at the position that is should be...
the needles jump when the car is started so be careful if you are installing them when the car is off
Originally Posted by BillBoost37
Oh Harofreak00..... how can Bean get these back to the right place again?
the needles jump when the car is started so be careful if you are installing them when the car is off
#8
what you need to do is have the clear plastic off the cluster and install it....then drive and manually install the needle at the position that is should be...
also, i did clear the needles on some test ones, but it looks like ****... i just scratched it off with a knife.. the best solution would be to have a blue/purple LED right behind the middle to shine out... good luck!
if you are going to use the stock bulbs, you need to find like a neon bright paint or something that would be like the orange you are replacing
#9
DINOSAURUS BOOSTUS
Expert Gearhead
I looked at some Pat did...
It'* interesting to say the least. Would you guys think a marker or something would do the trick to recolor them?
It'* interesting to say the least. Would you guys think a marker or something would do the trick to recolor them?
#10
Originally Posted by BillBoost37
I looked at some Pat did...
It'* interesting to say the least. Would you guys think a marker or something would do the trick to recolor them?
It'* interesting to say the least. Would you guys think a marker or something would do the trick to recolor them?