Door trim outside
#1
Senior Member
Posts like a Corvette
Thread Starter
Join Date: Nov 2005
Location: Hamilton, Ontario , Canada
Posts: 1,201
Likes: 0
Received 0 Likes
on
0 Posts
Door trim outside
At bottom of window, getting sick of looking at it so I decided to paint and clear coat.Rear drivers side was peeling real bad and rusting so I peeled it all off with xacto knife and sanded
then I put a rust proof primer on , then 3 coats of black trim paint and 3 coats of clear coat
Dont know how well you can see the 3 other doors are fading bad, thaese I will light sand and paint
They just pretty well pull off
Better than paying over 100 bucks each here at the dealer.Thought I would try the worst one first this is it not clearcoated yet ,and taped up.
then I put a rust proof primer on , then 3 coats of black trim paint and 3 coats of clear coat
Dont know how well you can see the 3 other doors are fading bad, thaese I will light sand and paint
They just pretty well pull off
Better than paying over 100 bucks each here at the dealer.Thought I would try the worst one first this is it not clearcoated yet ,and taped up.
Thread
Thread Starter
Forum
Replies
Last Post