Engine died on highway
#21
Retired
Take pics if you can.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#23
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: May 2014
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Put the engine and transmission back in place and it went super great , 30 minute and engine was at is place bolted to every support .
After plugging everything I tried and everything worked perfectly
Yay
Gota put drive shaft back tomorrow and hit the road to see how it handle
#24
Senior Member
True Car Nut
Thanks for the update, glad to hear that the job went well for you, let us know how it drives once you are done with it.
#25
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: May 2014
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Well i drive really well exept at idle, it run rough and shake and there a lot of popping in exhaust , sometime get misfire on cylinder
As soon as I give it some gas everything go well and misfire disappear , and as soon as I get to a red light misfire will come back after around 10-15 second
Could be firing timing ?
Spark plug was switched from cylinder and work well , coil is fine
I will probably get it to a mechanic to see what they find
As soon as I give it some gas everything go well and misfire disappear , and as soon as I get to a red light misfire will come back after around 10-15 second
Could be firing timing ?
Spark plug was switched from cylinder and work well , coil is fine
I will probably get it to a mechanic to see what they find
#27
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: May 2014
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
I didn't had time to check compression
#28
Retired
Give it a complete tuneup and report back please.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
The following users liked this post:
WilliamE (06-17-2014)
#29
Senior Member
True Car Nut
yep, stuff doesnt like to sit. the icm and coil terminals are likely corroded, plug wires break down over time, plugs. you will have to start there, let us know what happens
The following users liked this post:
WilliamE (06-17-2014)
#30
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: May 2014
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Plug, wire , coil are fine ..
Maybe the injector ?
I only worked on carb motor ( my bikes ) so I don't really know how this thing works