'93 bonneville to '94 park avenue 4T60E Swap.
#12
Retired
He'* going 93, to 94. As long as he repins the 93 to 94 specs, he should be fine. There are no "circuits" that I know of in these trannies. Only difference is 2 wires with the added temp sensor.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#14
Junior Member
Posts like a Ricer Type-R
Thread Starter
The re-pin is the part I'm concerned about. I really don't want to have to take it out to adjust the pins once its in.
#16
Retired
Ok, so just repin the external harness.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#17
Junior Member
Posts like a Ricer Type-R
Thread Starter
OK, update. Got it all installed and it still has the same problem it originally had; no first or fourth gear. Everything else functions as supposed to, reverse, 2nd, 3rd and TC lockup. I used the same solenoids. Hooked it up to OBD to check for codes and commands but it fails to connect.
Thoughts? Suggestions?
Thoughts? Suggestions?
#18
Retired
What did you hook up to it?
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel