What kind of amp for 2 Pioneer 10" P210S4
08-07-2006, 12:11 AM
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: May 2006
Location: Toronto, Ontario
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
What kind of amp for 2 Pioneer 10" P210S4
P210S4
10" PUNCH SUBWOOFER 200W
STAGE 2
* Punch 10" subwoofer
* 2" Aluminium coil
* BART surround
* Double stacked magnets - 60oz
* 200W RMS input, 4 ohm
Those are the specs. Please let me know what kind of amp is good to power these. Im guessing just a 400 watt amp at 4 ohms would be best?
10" PUNCH SUBWOOFER 200W
STAGE 2
* Punch 10" subwoofer
* 2" Aluminium coil
* BART surround
* Double stacked magnets - 60oz
* 200W RMS input, 4 ohm
Those are the specs. Please let me know what kind of amp is good to power these. Im guessing just a 400 watt amp at 4 ohms would be best?
08-09-2006, 01:07 PM
#2
Senior Member
Posts like a Northstar
Join Date: Apr 2003
Location: Milton, Ontario
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
Well if it was a 2x200W RMS @ 4ohm amp then that would be appropriate.
Or a 1x400W RMS @ 2ohm amp would also be appropriate.
If there'* cost concerns any 2x150W RMS @ 4ohm amp would also work well.
Or a 1x400W RMS @ 2ohm amp would also be appropriate.
If there'* cost concerns any 2x150W RMS @ 4ohm amp would also work well.
Thread
Thread Starter
Forum
Replies
Last Post
Bugsi
Audio (and aftermarket electronics)
8
05-18-2006 02:03 PM