2000-2005 Discuss your 2000-2005 Bonneville SE, SLE, and SSEi Please use General Chat for non-mechanical issues, and Performance and Brainstorming for improvements.

more vacuum pressure after lim gasket change?

Thread Tools
 
Search this Thread
 
Old 12-19-2012, 08:57 PM
  #1  
Member
Posts like a V-Tak
Thread Starter
 
ak1920's Avatar
 
Join Date: Oct 2010
Posts: 27
Likes: 0
Received 1 Like on 1 Post
ak1920 is on a distinguished road
Default more vacuum pressure after lim gasket change?

First want to say thanks to everyone who is on this site...the info has been great and helped me through so many fixes with my car including the lim gasket change I recently did...so I have a 2005 sle at 142000 miles I have just done the lim gaskets and a new uim and egr luckily it was only an external coolant leak from both gaskets...it seems after the change that there is a lot more vacuum throughout the motor I am getting a slight hissing sound from the air box and when turning the car off it does the same until it is depressurized?..also when I take the oil cap off with the car running it kind of stumbles and seems like a huge vacuum leak same even with the dipstick...common sense would tell me this is a good thing but prior to the change it never did this...the car runs great no check engine and I sprayed throttle body cleaner after breplacement just to check...seems fine no change at idle....so has anyone e
Old 12-19-2012, 09:02 PM
  #2  
Member
Posts like a V-Tak
Thread Starter
 
ak1920's Avatar
 
Join Date: Oct 2010
Posts: 27
Likes: 0
Received 1 Like on 1 Post
ak1920 is on a distinguished road
Default

Originally Posted by ak1920
First want to say thanks to everyone who is on this site...the info has been great and helped me through so many fixes with my car including the lim gasket change I recently did...so I have a 2005 sle at 142000 miles I have just done the lim gaskets and a new uim and egr luckily it was only an external coolant leak from both gaskets...it seems after the change that there is a lot more vacuum throughout the motor I am getting a slight hissing sound from the air box and when turning the car off it does the same until it is depressurized?..also when I take the oil cap off with the car running it kind of stumbles and seems like a huge vacuum leak same even with the dipstick...common sense would tell me this is a good thing but prior to the change it never did this...the car runs great no check engine and I sprayed throttle body cleaner after breplacement just to check...seems fine no change at idle....so has anyone e
experienced this after a lim gasket change is it due to the engine sealing better or did I screw something up
Old 12-19-2012, 09:21 PM
  #3  
Senior Member
Posts like a Camaro
 
rjblazer's Avatar
 
Join Date: Jan 2010
Location: Elmira, New York
Posts: 853
Received 31 Likes on 29 Posts
rjblazer has a spectacular aura aboutrjblazer has a spectacular aura about
Default

I would have to say somethings not right. I have done lots of intake reseals and have never had one that would stumble when the oil cap is removed. The hissing sound would be a vacuum leak. You should put your year, make, model, and engine size in your signature. That way the people that are possible going to help you know what you have. This would make it easier. Thank you.
Old 12-19-2012, 10:20 PM
  #4  
Senior Member
True Car Nut
 
rjolly87's Avatar
 
Join Date: Jun 2003
Location: Las Cruces, NM
Posts: 7,270
Received 457 Likes on 359 Posts
rjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant futurerjolly87 has a brilliant future
Default

The biggest cause of a whistle/screech that changes when you removed the oil cap is usually caused by a bad/missing o-ring on the pcv valve.
Old 12-19-2012, 10:32 PM
  #5  
Senior Member
True Car Nut
 
2kg4u's Avatar
 
Join Date: Sep 2006
Location: Windsor, Ontario / Detroit, Michigan
Posts: 4,816
Received 241 Likes on 198 Posts
2kg4u has much to be proud of2kg4u has much to be proud of2kg4u has much to be proud of2kg4u has much to be proud of2kg4u has much to be proud of2kg4u has much to be proud of2kg4u has much to be proud of2kg4u has much to be proud of2kg4u has much to be proud of
Default

Originally Posted by rjolly87
The biggest cause of a whistle/screech that changes when you removed the oil cap is usually caused by a bad/missing o-ring on the pcv valve.

More vacuum is a good thing, but only in the intake manifold, not in the crankcase. Rjolly is probably on the right track with telling you to check the PCV valve. Positive Crankcase Ventilation = no vacuum in crankcase.
Old 12-20-2012, 08:46 AM
  #6  
Member
Posts like a V-Tak
 
rkdragon's Avatar
 
Join Date: Dec 2012
Location: Yuma, AZ
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
rkdragon is on a distinguished road
Default

Sounds like it'* BAD, stuck open. $0.02
Old 02-10-2013, 06:43 PM
  #7  
Member
Posts like a V-Tak
 
DanSSEi00's Avatar
 
Join Date: Oct 2008
Location: Swansea Ma.
Posts: 92
Likes: 0
Received 0 Likes on 0 Posts
DanSSEi00 is on a distinguished road
Default

The missing O-ring on the PCV valve will also cause a a very loud squeal, sounds like a belt. If you were to take the dipstick, or oil cap off it goes away due to vacuum pressure in the crankcase. Good luck mang!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rstrunk
1992-1999
6
03-15-2009 09:24 PM
grey3800
1992-1999
4
01-11-2008 10:02 AM
Peder
Pontiac
3
12-20-2007 10:11 AM
jshelton54
General GM Chat
12
02-24-2007 12:04 PM
Damemorder
1992-1999
1
09-26-2004 11:07 PM



Quick Reply: more vacuum pressure after lim gasket change?



All times are GMT -4. The time now is 11:11 PM.