P0304 Code
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Jun 2005
Location: Pocahontas, IL
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
P0304 Code
99 SE,,,,, # 4 Cylinder misfire...
I checked the coils all check good, swapped two coils to see if the misfire moves (still waiting). New plugs and wires about a year ago.
Could this code be set by a dirty injector?
Like I said just swapped the coils last night and am waiting to see if the code returns.
Thanks
Steve
I checked the coils all check good, swapped two coils to see if the misfire moves (still waiting). New plugs and wires about a year ago.
Could this code be set by a dirty injector?
Like I said just swapped the coils last night and am waiting to see if the code returns.
Thanks
Steve
#2
DINOSAURUS BOOSTUS
Expert Gearhead
Pull the plug and let us know how it looks. A plug/wire doesn't have to be old to go bad. Most likely it'* the wire..but could be the plug too.
#3
Senior Member
Posts like a Supercharger
Join Date: Feb 2004
Location: San Jacinto, CA
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
What kind of plugs? Wires going bad after a year is unlikely, unless something happened to damage them. Plugs, on the other hand, can go bad any time. I had one crack in #4 about a year after installation which caused misfiring. Pull the plug and look for carbon scoring to indicate a crack.
#4
Senior Member
True Car Nut
I would definitely check the plugs and wires carefully first before I'd start suspecting the injectors. In the past, I've had both plugs and wires fail shortly after installation.
Thread
Thread Starter
Forum
Replies
Last Post