changed spark plugs on 94 se and now it wont start!
#1
changed spark plugs on 94 se and now it wont start!
So, my car was running rough and it was definately time for a tune-up. It had no problem starting or staying on before the tune-up. After I replaced the plugs and wires with correct firing order and correct gaps, it won't start! Do you think maybe I could have blown a fuse or something? I never knew a tune-up could make a car worse. Anyways, any help would be so much appreciated as I do love my beast.
#2
DINOSAURUS BOOSTUS
Expert Gearhead
When you say it doesn't start, please elaborate.
1. It won't turn over
2. It turns over, tries to start but won't start
3. Honestly Bill... I think aliens dinked with
1. It won't turn over
2. It turns over, tries to start but won't start
3. Honestly Bill... I think aliens dinked with
#4
It turns over, makes a wailing noise. The starter was replaced last year and when it had gone bad it made a clicking noise, nothing like this. Also, I checked the battery and its fine. We made sure the plugs and wires were nice and tight.
#5
DINOSAURUS BOOSTUS
Expert Gearhead
Ok.. let'* double check those plug wires. Firewall and radiator mentioned for orientation of the locations.
Firewall
2.....4.....6
Engine
1.....3.....5
Radiator
Coils (the wires going to one coil are interchangable because both towers fire at the same time.)
Firewall
3/6
2/5
1/4
Radiator
Firewall
2.....4.....6
Engine
1.....3.....5
Radiator
Coils (the wires going to one coil are interchangable because both towers fire at the same time.)
Firewall
3/6
2/5
1/4
Radiator
#6
Senior Member
Posts like a Turbo
Join Date: Dec 2008
Location: Mississauga Ontario
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
can you hear it fire on any cylinders or does it just turn over without any ignition?
do you hear the fuel pump when you put the key in the "on" position for 2 sec?
do you hear the fuel pump when you put the key in the "on" position for 2 sec?
Thread
Thread Starter
Forum
Replies
Last Post
buickpower3800sc
Performance, Brainstorming & Tuning
4
03-15-2003 04:27 PM