L27 UIM
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2005
Location: Southeast Wisconsin
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
L27 UIM
Today I took off the UIM on my Regal. Yes I know it'* not a H body, but seeing the engine was used from 92-94 you guys might be interested in the pictures....
I origionally started this because my thottle kinda hung up a little when I would push on the pedal from an Idle. After I took off the TB and saw how dirty it was I decided to take off the UIM to clean it as well.
Got it cleaned up decent now, I would just like to port the backhalf of the TB because it is smaller than the opening of the UIM.
Pics here. http://www.jbarbieri.net/~gsregal/UIM/
Many pics.
I origionally started this because my thottle kinda hung up a little when I would push on the pedal from an Idle. After I took off the TB and saw how dirty it was I decided to take off the UIM to clean it as well.
Got it cleaned up decent now, I would just like to port the backhalf of the TB because it is smaller than the opening of the UIM.
Pics here. http://www.jbarbieri.net/~gsregal/UIM/
Many pics.
#3
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Sep 2005
Location: Southeast Wisconsin
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, I've always wondered untill now myself. lol
Also if anyone wants specific pictures of the UIM or even the top of the LIM let me know. It'* going back on the Regal this weekend.
Also if anyone wants specific pictures of the UIM or even the top of the LIM let me know. It'* going back on the Regal this weekend.
Thread
Thread Starter
Forum
Replies
Last Post
Paul1981
2000-2005
10
12-21-2007 10:05 PM