help with trans plz
#1
Senior Member
Certified GM nut
Thread Starter
Join Date: Oct 2006
Location: burb of detroit. 2 miles north of 8 mile Rd.
Posts: 2,028
Likes: 0
Received 1 Like
on
1 Post
help with trans plz
hey guys, im gettin a lil further with the project in my sig, heres a link if u need more info http://www.bonnevilleclub.com/forum/...ic.php?t=64607
ive got all the engine sensors soldered. ive got about half of the trans sensors soldered. but im a lil lost on a couple wires. the round trans connector on the front driver side has a couple wires im not sure what to do with. also 5 wires coming off the trans position/neutral safety switch.
off the round 7 pin trans connector...
pin A-
pin E-
pin C-
on the trans pos switch...
lt grn/ blk stripe
pink/ blk stripe
orn/ blk stripe
solid blk
lt grn
any one know where these go? i searched on all data at my local library, but couldnt find a pinout of either. found a schematic of each, but not all wires are covered. little confused.
ive got all the engine sensors soldered. ive got about half of the trans sensors soldered. but im a lil lost on a couple wires. the round trans connector on the front driver side has a couple wires im not sure what to do with. also 5 wires coming off the trans position/neutral safety switch.
off the round 7 pin trans connector...
pin A-
pin E-
pin C-
on the trans pos switch...
lt grn/ blk stripe
pink/ blk stripe
orn/ blk stripe
solid blk
lt grn
any one know where these go? i searched on all data at my local library, but couldnt find a pinout of either. found a schematic of each, but not all wires are covered. little confused.
#2
Retired
What trans do you have? The 4L60 or the 4T60-E?
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#3
Please continue the original thread you posted in this thread.
This keeps all of the information regarding the problem/project in one spot.
http://www.bonnevilleclub.com/forum/...ic.php?t=64607
Thanks!
This keeps all of the information regarding the problem/project in one spot.
http://www.bonnevilleclub.com/forum/...ic.php?t=64607
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post