One new symptom Clutch Material pictures now included!!!ouch
#1
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
One new symptom Clutch Material pictures now included!!!ouch
Had the Bonneville out tonight, first time in a week, it was warmed right up, took it onto the highway, slowly accelerated TC no longer locks at 48 it locks at 54...last week it would go in at 48....i tried this about 10 time at any throttle it will not go in until 54 on the HUD
#2
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Farmington, Minnesota =MWBF '05 SURVIVOR= =CEBF '06 SURVIVOR= =August '06 COTM=
Posts: 9,130
Likes: 0
Received 0 Likes
on
0 Posts
mine will lock occasionally at 48...or not until about 52 or so...depends on hils and load and **** like that I believe.
#3
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
Flat surface, any surface..last few times i had it go in at 48 it shudderd badly.
#6
DINOSAURUS BOOSTUS
Expert Gearhead
Matt..knowing you arre having transmission troubles I wouldn't doubt that the more you drive the car the worse the transmission will act.
It'* only a matter of time and how quickly things break down as to how soon you notice more problems.
It'* only a matter of time and how quickly things break down as to how soon you notice more problems.
#8
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
I came across that crappy fluid in my garage tonight, poured it out, here is what was in the bottom of the pale..bare in mind, most of the grey crap poured out too, this is what i could reserve for a picture.
#10
Senior Member
True Car Nut
Thread Starter
Join Date: May 2003
Location: Lethbridge, Alberta, _______Canada._______ West Coast Bonneville Fest ___05,06,07 Survivor___
Posts: 8,135
Likes: 0
Received 0 Likes
on
0 Posts
yukky clutch material! Anyone know if the flush i had done would of removed the material from the bottom of the pan or if i should drop the pan and wipe it all out.?