decision to make... tough one!!!
11-27-2005, 07:26 PM
#1
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
decision to make... tough one!!!
taken from: http://www.bonnevilleclub.com/techinfo/?article=67
HMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM!!!! 
I would also suggest doing one lense first to see if the effect is really what you want.
11-27-2005, 07:38 PM
#5
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
WOW.......so much easier than the 95... no cutting or anything...
sitting in my comptuer chair doing it.... first one took me about 20 min... 2nd one maybe 3 min...
i highly suggest adding to the techinfo that you should start from the high beam side and just pull her open that way, using the corner lense as a hinge
sitting in my comptuer chair doing it.... first one took me about 20 min... 2nd one maybe 3 min...
i highly suggest adding to the techinfo that you should start from the high beam side and just pull her open that way, using the corner lense as a hinge
11-27-2005, 07:38 PM
#6
Junior Member
Join Date: Aug 2005
Location: North of Buffalo, NY *** NEBF '05, '06, '07 *** ***ONBF & NYBF 06; 07*** ***WCBF 06***
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
No tough decision at all....DO IT!!! Toasted Oats is the King of Cleared Corners on the 2000+ models on the East Coast...
EDIT: Whoops! Didn't realize you were in the process of doing it...ya'll posted while I was making this post!
And here'* a visual difference on two identical cars:
EDIT: Whoops! Didn't realize you were in the process of doing it...ya'll posted while I was making this post!
And here'* a visual difference on two identical cars:
11-27-2005, 07:40 PM
#7
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Fitchburg Ma _ToastedRice_
Posts: 6,837
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by harofreak00
i highly suggest adding to the techinfo that you should start from the high beam side and just pull her open that way, using the corner lense as a hinge
11-27-2005, 07:42 PM
#8
BANNED
Thread Starter
Join Date: Mar 2004
Location: Purgatory
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by toastedoats
Originally Posted by harofreak00
i highly suggest adding to the techinfo that you should start from the high beam side and just pull her open that way, using the corner lense as a hinge
11-27-2005, 07:43 PM
#9
Senior Member
True Car Nut
Join Date: Sep 2004
Location: Fitchburg Ma _ToastedRice_
Posts: 6,837
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by harofreak00
Originally Posted by toastedoats
Originally Posted by harofreak00
i highly suggest adding to the techinfo that you should start from the high beam side and just pull her open that way, using the corner lense as a hinge
11-27-2005, 07:47 PM
#10
Senior Member
Certified GM nut
Join Date: Sep 2005
Location: Home Sweet Home in New York
Posts: 2,009
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by harofreak00
WOW.......so much easier than the 95... no cutting or anything...
sitting in my comptuer chair doing it.... first one took me about 20 min... 2nd one maybe 3 min...
i highly suggest adding to the techinfo that you should start from the high beam side and just pull her open that way, using the corner lense as a hinge
sitting in my comptuer chair doing it.... first one took me about 20 min... 2nd one maybe 3 min...
i highly suggest adding to the techinfo that you should start from the high beam side and just pull her open that way, using the corner lense as a hinge
LOL, the 95 is easy:
www.ebay.com
www.paypal.com
Take parts out of box, remove 2 thumbscrews and 4 10mm nuts
take old corners out
put clear corners in
Return bolts
Chuckle
