audio re-install.....56K 10 beer wait..32 pics
#1
Senior Member
Certified Car Nut
Thread Starter
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
audio re-install.....56K 10 beer wait..32 pics
So i have spending the past 6 days totally gutting my previous install and redoing the thing.........pics are pleantyfull
the parts that i have taken out of the car...
took the RCAs out and the speaker wire out of the car
the spagetti under the dash
moved my capacitor to the drivers side corner of the trunk....the cutout was a perfect side
and its attached through the carpet with bolts and washers
here are the brackets that my dad and i made to attach the amps tho the trunk lid
put one layer of peel and seal on the trunk before the brackets went on
one bracket attached
both brackets
and we used the frame of the trunk to make the other mounting points
right side
left side
the trunklid insulator is now in with all the cutouts for the mounting points for the amps
i ran the wires through existing holes in the insulator
I have the both distro blocks mounted and the wires all hidden for them
one amp molunted with out cover on it, not wired up yet
both amps up there, unwired
Both amps mounted wired and finished product
BUT you would think that i was done......wrong....
making speaker baffles for the front doors
with the speakers
i made an adapter ring for the speaker since the mounting holes didnt match the door panel
I had to cut the door so the speaker and the Baffel would fit
speaker, tweeter and crossover installed
Still not done....
Peel and Seal time...
2 layers, yes 2 layers on each door
and some on the door panels too
there all done.....whadda ya think??
the parts that i have taken out of the car...
took the RCAs out and the speaker wire out of the car
the spagetti under the dash
moved my capacitor to the drivers side corner of the trunk....the cutout was a perfect side
and its attached through the carpet with bolts and washers
here are the brackets that my dad and i made to attach the amps tho the trunk lid
put one layer of peel and seal on the trunk before the brackets went on
one bracket attached
both brackets
and we used the frame of the trunk to make the other mounting points
right side
left side
the trunklid insulator is now in with all the cutouts for the mounting points for the amps
i ran the wires through existing holes in the insulator
I have the both distro blocks mounted and the wires all hidden for them
one amp molunted with out cover on it, not wired up yet
both amps up there, unwired
Both amps mounted wired and finished product
BUT you would think that i was done......wrong....
making speaker baffles for the front doors
with the speakers
i made an adapter ring for the speaker since the mounting holes didnt match the door panel
I had to cut the door so the speaker and the Baffel would fit
speaker, tweeter and crossover installed
Still not done....
Peel and Seal time...
2 layers, yes 2 layers on each door
and some on the door panels too
there all done.....whadda ya think??
#3
Senior Member
Certified Car Nut
Join Date: Aug 2004
Location: My reclining computer chair
Posts: 11,269
Likes: 0
Received 0 Likes
on
0 Posts
Looks awesome!!!!!!
Only ???? i have is what about the heat dissapation with the amps on the inside of the trunk and mounted upside down.
Only ???? i have is what about the heat dissapation with the amps on the inside of the trunk and mounted upside down.
#4
Senior Member
Certified Car Nut
Thread Starter
Join Date: Oct 2003
Posts: 19,756
Likes: 0
Received 0 Likes
on
0 Posts
thanks haro...i really like the way it turned out, my dad and i really worked hard on getting everything right
I cant have subs with all the moving that i do....give me like 2 years, when school is done...i will out do the above pics with the sub install
and the peel and seal was awesome....haven had the car on the road tho....havent really even moved it in like 4 days
thanks
the amps have a unique cooling design that allows them to be mounted in any orientation......
I cant have subs with all the moving that i do....give me like 2 years, when school is done...i will out do the above pics with the sub install
and the peel and seal was awesome....haven had the car on the road tho....havent really even moved it in like 4 days
Originally Posted by dbeast420
Looks awesome!!!!!!
Only ???? i have is what about the heat dissapation with the amps on the inside of the trunk and mounted upside down.
Only ???? i have is what about the heat dissapation with the amps on the inside of the trunk and mounted upside down.
the amps have a unique cooling design that allows them to be mounted in any orientation......
#8
Senior Member
True Car Nut
Join Date: Jun 2004
Location: Rochester, NY (college)
Posts: 6,182
Likes: 0
Received 0 Likes
on
0 Posts
I want to hear and SEE that install. Very nice
I hope you have that thing drive ably by mid next week. I want to see if that peal and seal makes a difference.
I hope you have that thing drive ably by mid next week. I want to see if that peal and seal makes a difference.