most recent project ( LED)
4 Attachment(s)
yes I dont feel like re making my post so I am going to copy what I posted on a different forum.
Yes I happend to have both on hand and told my friend to come over and take some pictures for me. First lets start with stats. 5mm Red 20Ma / 8000mcd / 2.6max voltage / 30deg. Viewing angle / 628wavelength (nm) running at 2.1 volts (used supplied resistor to reduce from 12 volts) Superflux HPWT MD00 F4000 red 70ma / 3lumen / 70deg viewing angle / 3volt max / running at 2.4 volts (5 LED series from 12 volts) held same distance from wall Attachment 70560 held same distance from wall, as parallel to the wall as possible Attachment 70561 2nd 3rd brake light project... Attachment 70562 Attachment 70563 yes it will be on a voltage regulator, and yes its freaking bright, and no, you can't have it. :tonqe: This is my 2nd one, because the first one I do not like the pattern of the LED's. first superflux TL. (superflux on right, stock on left) (note: the plastic trip piece is not on either of them, so some of the stock brightness is the actual bulb, which you dont see when on the car) (note2: that is not my basement, and not my big mess) https://i24.photobucket.com/albums/c...D/P1010030.jpg |
you rock with your LED 133tness
|
Woot. My camera Ownz these pictures.
This really looks good in person. Very Bright. |
Originally Posted by JimmyFloyd
Woot. My camera Ownz these pictures.
This really looks good in person. Very Bright. |
Originally Posted by 1993 SLE
you rock with your LED 133tness
Correction to the quoted statement above: 1337ness We now return you to your regularly scheduled thread. 8) |
I think all you NEBF'rs should come clean my messy basement.
|
Originally Posted by BillBoost37
I think all you NEBF'rs should come clean my messy basement.
|
3 Attachment(s)
newest one in housing...will have to wait until spring break to see it in action.
Attachment 70416 Attachment 70417 running at about 10.6 volts/4 LEDs = 2.65volts per LED 3 volts is max :twisted: Attachment 70418 |
Did you go closer to the red lense than before with the PCB?
|
Originally Posted by BillBoost37
Did you go closer to the red lense than before with the PCB?
|
Kick it on and leave it on for a while.
LED's generate almost no heat. I left the PONTIAC ones on for hours the other night when Jim, AJ and Randy were over...never heated up.. (not regular bulbs ;) ) |
Originally Posted by BillBoost37
Kick it on and leave it on for a while.
LED's generate almost no heat. I left the PONTIAC ones on for hours the other night when Jim, AJ and Randy were over...never heated up.. (not regular bulbs ;) ) |
Ever think you might have overdone it? Weren't you afraid at my house that you might give the person behind you a suntan in the time it took for the stoplight to change?
|
That looks sooooo sweet.
|
Originally Posted by BillBoost37
Ever think you might have overdone it? Weren't you afraid at my house that you might give the person behind you a suntan in the time it took for the stoplight to change?
|
hrmmmm..... it looks like when you hit the brakes, you are going to blind the guy behind you and then he will rear end you...
perhaps mods of this fashion should be in order for the tempo... |
the LED's and the Board looks good in the housing
|
All times are GMT -4. The time now is 09:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands