A 40th Gets Some TLC.
7 Attachment(s)
Yesterday, Rudy came over so he could begin giving his 40th SSEi the luvin' it deserves. After seeing his work ethic (he dove right in with no problems) and his attention to detail, I can honestly tell the club we have found a GREAT new member and are lucky that he ended up with this 40th. He is one new 40th owner that will do our club proud. He is definitely addicted to his Bonne and BC.
We started with a Mobile 1 oil change (the existing filter was on so damn tight, we almost gave up, but I finallly got it to break free :roll: ) Then we went to flush out the dex-cool (which was beginning to gel). It wasn't too bad, except that when I initially opened the radiator drain-cock, we had no flow. After some prodding with an awl, I finally got it to a trickle. After it drained, we added some chemical flush and after the procedure was done, the second draining went great since the drain was now flowing better than old faithful. During the coolant draining, Rudy changed the SC oil. (Yes, he was properly baptised as a SCed owner upon sniffing the worst odor known to the 3800 community :lol: ). We then rigged up his driver side exhaust (split rubber hanger) until he can get a replacement rubber. We also tried the "swap the horn and A/C relay" trick to see if his A/C clutch would engage, but I guess it just was't his lucky day. No clutch engage, so, still no A/C. Finally, we gave the engine bay it's first ever cleaning. We still have some scrubbibg left, but I was impressed with Rudy's abilities and determination with a detail brush. I was worried that I might scare him off when I brought out the "little" brushes to begin getting all the crud off of the engine, bu he just took a brush and started going at it. In fact, he was removing grease and oil deposits in places only he and I would know about, so I think he is OK. 8) Rudy also conditioned the leather of the entire interior while I was buttoniing things up under the hood. He also discovered that he has tilting headrests. I swear it took both of my hands to rotate them....obviously the previous owner of the car either never knew he had rotating headrests or never bothered to rotate them because they where the tightests headrests I have ever experienced. We have some more work to do yet, but this is one 40th that is being brought back up to the high level of attention that it deserves. Next up is endlinks and replacing the busted tailpipe hanger, phase two of engine bay detailing, then a good general washing and photoshoot with my teal '97. BEFORE (UGH) Attachment 57356 Attachment 57357 AFTER 8) Attachment 57358 GENERAL PICS Attachment 57359 Attachment 57360 Attachment 57361 Attachment 57362 |
Awesome Job Guys!! The engine bay before and after pics are really amazing!!
Good to see the attention to detail. |
great job with the cleaning. me and my day was seconds away from buying a 40th. We decide not to we didn't trust the guy that was selling it.It also need alot of work
|
Great work guys!! I love the results and it's great to hear about another member caring so well for his car!
|
Re: A 40th Gets Some TLC.
|
wow, nice job there guys....very nice indeed.
|
Good work guys, nice to see a Y40 getting some TLC.
Is that a 6" SC pulley :P :twisted: :?: Cheers, |
Originally Posted by petraman
Damn, that's a good cleaning job there! That engine bay is SPOTLESS :shock:
As far as the pulley....yeah, it's still the 3.8 stocker, but she runs very strong. 8) For $2300 and 90K miles, he may have gotton the deal of the century. |
Looking great.
Time for him to get a decent sized sig pic now ;) |
:shock:
WOWZERS now that is a clean engine 8) nice job guys and welcome again ;) |
All times are GMT -4. The time now is 01:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands