MY 2002 Firebird
https://img129.imageshack.us/img129/...c00187sjd3.jpg
Race from Tri Sate Raceway, Iowa racing in the Super Gas Class Race from Wisconsin International Raceway w/ 300 cu in Engine. Momentarily dies at the line still ran fast. |
Damn that thing is quick :shock: ;)
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Yeah i know, wish i had some of the all-out runs that i could upload. maybe this coming spring i might get some videos of the all-out runs.
|
still makes me beam that we had a FWD bonneville in the 10's ;)
nice car though.. got any under body pics? |
Jeez that is quick. If you need a parchute you have too much hp.
had it on a dyno before? |
1095 hp at 10500rpm
750tq at 7000rpm that was back in june that it was dynoed |
Why such a big variation in your claimed best of 7 sec
@ 185 and the vids times of 9 and 10 sec @ 150ish :?: |
The 10 flat run was from when we ran the car in the NHRA Super Gas Class, where the entire class tries to run as close as possible to 9.90 seconds in the quarter. normally the car will run 7's all out, but to run 9.90 we use a throttle stop which brings the engine almost to idle for roughly 3 seconds after the launch.
On the 9.15 run, which was going to be an all-out run, the metering in the carburetor got fouled up with somthing casuseing the engine to die at mid to high rpm. This is why if you notice the car did not "wind-up" at the starting line and just rolled through the staging beams initally. It also died on the top end around 900 feet. Turns out that their was a metalic partical lodged in one of the emulsion tubes. Sorry that i dont have a decent all out video. Hoping to get some this spring |
Originally Posted by Hans
Jeez that is quick. If you need a parchute you have too much hp.
had it on a dyno before? Erik |
normally the car will run 7's all out, but to run 9.90 we use a throttle stop |
Nice ride and quick car 8)
Any more pics? Whats all in that 300cu in motor? |
[img]https://img308.imageshack.us/img308/...lietaz9.th.jpg[/img]
4.185" Bore X 2.75" Stroke SB2.2 Cylinder Heads Jesel Rocker Arms 2.0:1 Ratio Titanium rods, springs, valves, retainers, keys Dual 1295 cfm dominators on sheetmetal intake 4 Stage Drysump The car is in the shop for winter maintainence right now so if you want some real indepth pics, i can get them now |
4.185" Bore X 2.75" Stroke SB2.2 Cylinder Heads Jesel Rocker Arms 2.0:1 Ratio Titanium rods, springs, valves, retainers, keys Dual 1295 cfm dominators on sheetmetal intake 4 Stage Drysump The car is in the shop for winter maintainence right now so if you want some real indepth pics, i can get them now Yes, please, I would love some more in depth pics of that drivetrain. :D What does it rev to :?: |
Originally Posted by Speedster400
The car is in the shop for winter maintainence right now so if you want some real indepth pics, i can get them now
|
It spins to 11500 to 12000
At the moment the Gas engine (400 in) is in the car with the powerglide. I'll try to get some pictures of the 300 in engine when it comes back from the machine shop |
Sweet 'Bird!
You need to get it over to the Ames Pontiac Nationals in Norwalk, OH in August! I'd love to see it run! There's a handful of powerhouses, such as yours, that really catch ALL of the crowd's attention. |
All times are GMT -4. The time now is 10:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands