MAP sensor plug test
10-01-2009, 01:59 PM
#1
Retired Senior Admin
Expert Gearhead
Thread Starter
Join Date: May 2006
Location: Sheboygan Wisconsin
Posts: 29,661
Likes: 0
Received 28 Likes
on
24 Posts
MAP sensor plug test
Locate your MAP sensor(*), they are on the rear of the engine above the rear valve cover. The plug(*) are on the rear and point down.
Lift on the tab, wiggle and push down. Do not pull on the wires. Check plug for corrosion or damage. Clean or repair if needed.
Lift on the tab, wiggle and push down. Do not pull on the wires. Check plug for corrosion or damage. Clean or repair if needed.
Thread
Thread Starter
Forum
Replies
Last Post
Danthurs
Trouble shooting + Test Procedures
0
10-01-2009 01:51 PM
