Program security key 2002
Thread Starter
Senior Member
Posts like a Northstar
Joined: Sep 2006
Posts: 577
Likes: 0
From: Dumfries, Virginia Member: #6887
To program an extra key yourself you need at least one key that is already programmed, otherwise you will need to have a Dealer do this for you.
1. Insert the programmed key into the ignition and turn to run (not start) wait until the security light goes out
2. Quickly remove the first key and insert the new (unprogrammed and cut) key and turn the ignition to run (not start). Again waiting until the security light goes out.
3. Turn the ignition to off and removed the newly programmed key
4. Then reinserted the newly programmed key and turn the ignition to start.
1. Insert the programmed key into the ignition and turn to run (not start) wait until the security light goes out
2. Quickly remove the first key and insert the new (unprogrammed and cut) key and turn the ignition to run (not start). Again waiting until the security light goes out.
3. Turn the ignition to off and removed the newly programmed key
4. Then reinserted the newly programmed key and turn the ignition to start.
Last edited by Danthurs; Jan 25, 2009 at 02:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
koolaidman2021
Everything Electrical & Electronic
1
May 25, 2006 04:44 PM
heysport1
Audio (and aftermarket electronics)
6
Apr 7, 2003 07:59 PM