My passenger rear window switch is messed up, I can only roll it down from the drivers door and can only roll it up from the rear door. I have changed the master window switch and the door switch. What other options do I have?

Anybody have any ideas?

clean the contacts on the Drivers switch and the Other one Very well and put some Dielectric grease on them. i had to do that with mine.

also look inside the switch i bet there is some corrosion in there. i used a Very! small flat blade screw drive to fit in there and scrape them up.

So yours was doing the same thing?

mine was doing a similar thing. the drivers side window would not work but the pass-rear one would. then they both stopped working.

I have a problem with both switches and the plug on the motor. cleaned everything up and problem fixed.

cool thanks