I never did post any pictures of my TC Pod, partly because i never really had it on completly, there was a plastic nub sticking out that i had to file off in order for the pod to slip in and click....but anyway

picture:


I combined 3 TC pods so that all the buttons were on one, what aggrivated me the most is that between years the way each was put together seemed backwards or completly differnt, but i made my way around it and all the buttons are push-able and have the slight 'click' when pushed...i would even put the lightbulbs in if i wanted but i will be needing a sautering gun for that to work

so now i can be like dont push that button, and Alex, my freiend, being how he is would push it and it does nothing YAY!

yes GM changed the design on the pods when the introduced the CCR in 94....the connector is different from the 92-93 pods where there is no CCR....cool that you got it to work tho

Do what my did in a truck he got to play with. Run power from that button to the springs in the power seat. He also labeled it "DO NOT PUSH", so guess what everyone did... Only once.

Not a good way to get zapped

good idea...hmm
Ejector seats ....nah that could get to pricey



Im gona try and find a way to get that little circuit board done up so the lights will work, and i'll figure it out just for that....Im in an Enginnering course right now, Electrical Enginnering is the next Chapter i think...maybe i'll get it done then

Soldering irons can be had for like 6 bucks. Worth the investment. Buttons and lights are always good to have

is that how its spelled....ohhhh

mmk, i'll havta look into that

Why do you need a soldering gun to get the lights to work?

The harness for the pod should be in the console already. I just plugged a pod into my car and it lit up. The shift button LED'* even cycle as they should when the buttons are pushed.
With the seat buttons, i used an inline crimp to connect the illumination bulbs.

because i used 2 differnt Pods so that i caould have all the buttons on one, you cant combaine the cirtuit board, i have to swap the electrical parts over to one,,,

do you have a plan for the buttons..or just felt there weren't enough in the car?

There can never be too many buttons or lights!