PEM series 1 NA
Thread Starter
Senior Member
Posts like a Northstar
Joined: Apr 2006
Posts: 675
Likes: 0
From: In the mitten
PEM series 1 NA
Hey guys, what kind of power increase would be expected with these on a L27? I was planning on doing the cold air induction and a few other mods too. Is there some power increase in this?
Thanks,
Chris
Thanks,
Chris
Junior Member
Posts like a Ricer Type-R
Joined: Aug 2002
Posts: 11
Likes: 13
5hp? You're not in the MUST HAVE category as the L67, as you flow considerably less, and don't have the advantage to add flow easily.
If you're going to take them off anyway to fix cracks, by all means, work them over.
If you're going to take them off anyway to fix cracks, by all means, work them over.
Thread Starter
Senior Member
Posts like a Northstar
Joined: Apr 2006
Posts: 675
Likes: 0
From: In the mitten
Originally Posted by willwren
5hp? You're not in the MUST HAVE category as the L67, as you flow considerably less, and don't have the advantage to add flow easily.
If you're going to take them off anyway to fix cracks, by all means, work them over.
If you're going to take them off anyway to fix cracks, by all means, work them over.
Thread
Thread Starter
Forum
Replies
Last Post
Glasuan
Performance, Brainstorming & Tuning
11
Feb 15, 2005 01:38 PM