My mom gave me 100 bucks and said.......go get what u want......so i wandered into the auto section at walmart and picked up some silverstars.......is there instructions to take the headlights out in techinfo?

No instructions in tech info....but your owners manual tells you. Two 10mm bolts on the inner portion of each headlight bracket. Then, slide the whole assembly (corner lights, too) outward toward the edges of the car (there are two pins on the back side of the cornering lghts that are in holes on the body structure, and the cornering lights are attached to the headlight. That is why the whole assembly needs to slide out to clear the pins from the holes)

so i wont have to reset the position of the h/l when i put them back in right?

Nope...as long as you don't take the headlight off of the bracket (you dont have to take the headlight off of the bracket to replace the bulbls). Remove two 10mm bolts, slide/pull headlight assembly (no need to remove the corner lights, either), remove old bulb, put new bulb in, repostion pins on corner lights to holes, slide back in place, put two 10mm bolts back in. Done

great

pry wont get done til monday though busy weekend with graduation

i tried tonight....i can't pull the damn thing out.....i took the 2 bolts out, then pulled outwards and the corner light is like its stuck....and i cant reach in to undo anything holding onto the corner light

if you're afraid to pull the whole assembly out there is a philips screw in between the headlamp and the corner marker as you're looking down from the top.

thanks, i did notice that, so i may do that

but how hard of pull does it take to get the whole unit out? including corner lamps? cuz i pulled pretty hard and it didnt come out

thanks for ur help guys, i ended up unscrewing the corner light, pulling it out, and then pulling the headlight unit out.....much easier IMO....

now i got silverstars