Yeah I could do a search, but I'm at work and can't spend a WHOLE lot of time parusing the forum.

Prolly getting a '95 bonny

Can I get a brief (or expanded if you have time) list of what to look for in the 3800 Series II.

All I know about is the plastic IM. Where would I be able to find an aluminum or cast im if they make one?

Dammit, not even here for an hour and I already screw up the whole system...

can a mod throw this in the appropriate forum!??!

sorry.

(wow, tripple post)


THANKS FOR THE MOVE!!

If it'* non-SC'ed, you'll wanna watch the Upper Intake (trust me...) Other than that, pretty much bullet proof with proper maintenance...

Other will surely chime in with thier experiences, but that'* the main thing that jumps to my mind....

yeah, it'* N/A

Any input on a "cai" or other cheap mods?

I'm not going to be spending a LOT of money on the car. but letting it breath better can only help in many ways.

You could get a nice kick in the pants from ported exhaust manifolds and a home made CAI or fender well intake.

The exhaust manifolds are the most restrictive part of the exhaust. You can get cheap ported manifolds at http://www.hulkspeed.com/Pems/Ported...0Manifolds.htm .
BUT your manifolds are year specific and you will need to send him 95 n/a manifolds.

You could do a search and find the CAI/FWI'* other people have made or you can check out www.intense-racing.com for there fender well intake kit.

very cool!!

thanks!

you may wanna replace the stock 195* thermostat for a 180*

Master cylinder leaks, also rear brake cylinders. The heat shield above the muffler likes to rust through where it'* screwed in...can cause an annoying rattle.

I appreciate the help guys!!!

I'll be taking a look at the car next wednesday. I wasn't able to look at it last weekend. I got a little too drunk at a party so i wasn't driving anywhere then next morning! (hey, i hooked up with my friends fiance'* sister though! sweet)