Crank shaft position sensor re-learn
#1
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Apr 2015
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Crank shaft position sensor re-learn
I have an 03 bonneville ssei and while troubleshooting a p0300 misfire code, I disconnected the crank position sensor to inspect the connection. I didn't remove the sensor I only disconnected it. When I plugged it back in and started the engine the misfire and p0300 code went away. Now, it'* throwing a p0303 code. The engine seems to run fine. Plenty of power and no hesitation. My question is......do I need to have the crank sensor re-learned at the dealer for only disconnecting it?? It never threw a p0303 code before I did this.
#2
Retired
P0303 is cylinder #3 misfire. Are you sure you got the right code?
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#4
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Apr 2015
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
#5
Retired
Swap plug wires 3 and 5 and see if the misfire follows. If it doesn't, swap plugs 3 and 5. If the misfire still doesn't move, then swap the coil pack for a one of the others. Last resort is to swap injectors, but that'* rare that a misfire is caused by an injector.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
#6
Junior Member
Posts like a Ricer Type-R
Thread Starter
Join Date: Apr 2015
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Swapped the wires no change. Plugs are brand new but I'll try it anyway. I swapped fuel injector 3 and 5 and am still waiting for the code again. I'll let you know. So this has nothing to do with the crank sensor being disconnected?
#7
Retired
It shouldn't.
__________________
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Retired Administrator
2002 *-10 5.7 V8
2023 Jeep Rubicon Diesel
Thread
Thread Starter
Forum
Replies
Last Post