Homemade PEMS
#1
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Jun 2005
Location: Yulee , FL ___ SEBF Survivor
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
Homemade PEMS
Has anyone ported exhaust manifolds on their own? I just finished porting my back manifold, I have seen many posts af people that weld their back manifold. When I was grinding, I could see smoke leaking through. Is this a necessary step, or is it wasted time. I am going to weld them anyway because I saw smoke leaking, but just for knowledge purposes, has anyone done this and not welded? Could you hear exhaust leaks?
#2
Junior Member
Posts like a Ricer Type-R
Be VERY careful. If you get them too hot, they'll warp. The proper sequence is to stitch weld with cooling in between FIRST, then port them. That'* the way I did mine. I gained 16-20% on all ports, front and rear (all of mine are tubular, not cast, you have one of each).
#6
Senior Member
Posts like a Corvette
Join Date: Sep 2004
Location: Pittsburgh PA
Posts: 1,539
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Peterg22000
quick question then you can get back on topic...what does "WOT" mean??? ive seen lots of ppl using the term but i still cant figure it out.
:?
:?
#9
Junior Member
Posts like a Ricer Type-R
No idea without looking and measuring. Measure the ID of the manifold, particularly if the OEM weld is on the INSIDE of each port. Meausure the ID of the exhaust port in the heads. If head port>EM port, then port!
#10
Senior Member
Posts like a Northstar
Thread Starter
Join Date: Jun 2005
Location: Yulee , FL ___ SEBF Survivor
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
Finished porting the rear last night, sent them off to get welded by my friend. His welds look like a row of dimes overlapping each other, not blobs of material like mine, so hopefully they will look professionally done. Next step is header wrap or jet hot. I would prefer not to wrap them because of potential hot spots. If the $$ is right I will get them coated with jet hot. My swap has spun out of control, and I am fearing that I might go over budget, oh well, it'* a hobby right.