View Poll Results: What next?
Voters: 3. You may not vote on this poll
What next?
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Aug 2007
Location: Edmonton, Alberta, Canada
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
What next?
It'* time to start to working on Shadowfax'* performance now.
What do you guys think, based on your guys' experiences and opinions with each?
If it'* best, I COULD get both, but let me know what you think.
Thanks ahead,
Josh
What do you guys think, based on your guys' experiences and opinions with each?
If it'* best, I COULD get both, but let me know what you think.
Thanks ahead,
Josh
#2
Junior Member
Posts like a Ricer Type-R
INTENSE PCM and INTENSE shift kit at the same time. Together, they're not expensive, and total install time for the pair is 2-3 hours for a noob (9 beer job).
#4
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Aug 2007
Location: Edmonton, Alberta, Canada
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by willwren
INTENSE PCM and INTENSE shift kit at the same time. Together, they're not expensive, and total install time for the pair is 2-3 hours for a noob (9 beer job).
I was thinking Standard PCM, Increased idle speed tables, 180 t-stat setting, stock WOT ignition timing tables, and increase WOT shift points to approximately 6,000 RPM and engine rev limiters to 6,200 RPM. So pretty much the "a la carte" settings, except for the increased idle speed tables.
So why the Intense shift kit over the Thrasher?
#8
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Aug 2007
Location: Edmonton, Alberta, Canada
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
I don't have anything to compare it with but I think it could run better.
But I'm guessing I might be wrong here?
But I'm guessing I might be wrong here?
#9
Senior Member
Posts like a Turbo
Join Date: Jan 2005
Location: Melbourne, FL
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Any plans for rockers or a cam down the line? If not then a 6k shift point may be a bit high. I remember my butt dyno telling me that the stock L67 ran out of steam just past the stock 52-5400rpm shift point.
+1 for the Intense shift kit. I love mine.
+1 for the Intense shift kit. I love mine.
#10
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Aug 2007
Location: Edmonton, Alberta, Canada
Posts: 409
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 96SSEi_tampa
Any plans for rockers or a cam down the line? If not then a 6k shift point may be a bit high. I remember my butt dyno telling me that the stock L67 ran out of steam just past the stock 52-5400rpm shift point.
+1 for the Intense shift kit. I love mine.
+1 for the Intense shift kit. I love mine.
Thread
Thread Starter
Forum
Replies
Last Post
BonneAlien
Your Ride: GM Pictures & Videos
2
01-10-2003 07:31 PM