SOME INFO NEEDED
#1
Guest
Posts: n/a
SOME INFO NEEDED
ok, im looking to increase my valve size, i need to know the valve diam. and the overall valve length on a series 1 motor. i need the info on both the intake and exhaust valves.
im picking up a set of heads and vavle covers next sat. but i just want to see if maybe i can use race valve in these heads. im loking at undercut mildon race valves for a sbc. i know the stem diam. is the same. and might go to 1.5-1.6 exhaust valves and 1.94 intakes if they will work with the overall valve length
can anyone help me here
thanks
im picking up a set of heads and vavle covers next sat. but i just want to see if maybe i can use race valve in these heads. im loking at undercut mildon race valves for a sbc. i know the stem diam. is the same. and might go to 1.5-1.6 exhaust valves and 1.94 intakes if they will work with the overall valve length
can anyone help me here
thanks
Thread
Thread Starter
Forum
Replies
Last Post
SSEi Ei O
Performance, Brainstorming & Tuning
6
04-16-2006 03:23 PM
94Regal
Bonneville GXP/ Northstar Powered Cars
13
02-10-2004 04:35 PM