l67 fuel injectors @ 43.5pis? whats the Lb/hr?
#1
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2009
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
l67 fuel injectors @ 43.5pis? whats the Lb/hr?
https://www.gmforum.com/t274205/
I saw that post, but it seems that the bonnies run a higher psi, then my caprice.
I can ****** some L67 injectors out of some cars from the yard, to fuel my new build.
From my understanding raising or lowering the PSI of an injector changes the fuel rate.
BTW.
bs2
I saw that post, but it seems that the bonnies run a higher psi, then my caprice.
I can ****** some L67 injectors out of some cars from the yard, to fuel my new build.
From my understanding raising or lowering the PSI of an injector changes the fuel rate.
BTW.
bs2
#2
Senior Member
Posts like a Corvette
Join Date: Jun 2008
Location: Cleveland, OH
Posts: 1,389
Likes: 0
Received 0 Likes
on
0 Posts
That is true, now it depends on what program you use to tune the PCM
In DHP the fuel flow rate was measured in milliseconds/gram (how many milliseconds it takes one gram of fuel to flow)
and in HP Tuners it is Lbs./Hour so just what you know what you are tuning for
what model/year car did they come from? there are slight differences from year to year and car to car
In DHP the fuel flow rate was measured in milliseconds/gram (how many milliseconds it takes one gram of fuel to flow)
and in HP Tuners it is Lbs./Hour so just what you know what you are tuning for
what model/year car did they come from? there are slight differences from year to year and car to car
#4
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2009
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
I belive the cars I have choices of injectors, (check my junkyard SSEI finds 3 infact)
They range from 96-98 I belive.
The project,
358 gen 1 block (non roller)
SIngle plane EFI Vortec intake converted to FI
Vortec heads
12-771-8 solid roller cam reto.
Headers
Dynomax bullets.
My tunning software uses LB/HR Tuner Pro
Th350
3500 stall
3.23 gears
Should get my big92 caprice wagon up to 12.8s in the 1/4.
They range from 96-98 I belive.
The project,
358 gen 1 block (non roller)
SIngle plane EFI Vortec intake converted to FI
Vortec heads
12-771-8 solid roller cam reto.
Headers
Dynomax bullets.
My tunning software uses LB/HR Tuner Pro
Th350
3500 stall
3.23 gears
Should get my big92 caprice wagon up to 12.8s in the 1/4.
#5
DINOSAURUS BOOSTUS
Expert Gearhead
The L67 injectors are rather large compared to most other cars out there and certainly they are typically larger than most V8'*. If you need larger than the 36lb injectors, Ford Lightenings use 42lb and even larger are available.
#6
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2009
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Naw I dont need them that big, Desktop dyno claims about 461 hp, according to my chart 36 lbs should work, but since its rated at 50 psi, IDK what it would do on 40. (40 is realy where my psi is according to my gauage)
This is being done on a bugdet, my dad is giving me his trans,stall, and heads.
Im just doing the othe parts, cam and intake.
This is being done on a bugdet, my dad is giving me his trans,stall, and heads.
Im just doing the othe parts, cam and intake.
#7
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2009
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Came to the conlcusion why not just get a SSEI FPR?
If it runs at 50psi, Im sure i can run it.
Is the stock FPR boost refferenced? How high can it go?
Any pics of one?
Decided to go to a less radical cam, and a Holley Stealth ram intake.
http://www.summitracing.com/parts/LUN-00012LK/
which is quicker then the other cam and its a hydro flat tappet.
So guys help me out on the fuel.
If it runs at 50psi, Im sure i can run it.
Is the stock FPR boost refferenced? How high can it go?
Any pics of one?
Decided to go to a less radical cam, and a Holley Stealth ram intake.
http://www.summitracing.com/parts/LUN-00012LK/
which is quicker then the other cam and its a hydro flat tappet.
So guys help me out on the fuel.
Last edited by Killerzracing92; 11-15-2009 at 09:48 PM.
#10
Member
Posts like a V-Tak
Thread Starter
Join Date: Feb 2009
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Sweeeeeeeeeeettttttttt its BOOST refferenced. Damn I kinda want an SSEI now
Im wondering if I can get away with constant 50 psi, if the injectors are made for it shouldnt be a problem. IDK what my DC will be on the injectors.
What size is the line?
Is it part of the Rail?
Also, it does use a vacum line to determine if its in boost right?
Im wondering if I can get away with constant 50 psi, if the injectors are made for it shouldnt be a problem. IDK what my DC will be on the injectors.
What size is the line?
Is it part of the Rail?
Also, it does use a vacum line to determine if its in boost right?