Undercoat/Por 15
 

Well, I pulled up a little bit of the carpet in this inside and found a puddle of water. Well I figured I might as well do a little mini project in the next couple of days. I am going to take out the carpet in the inside/trunk and clean the metal with a degreaser (simple green) then let it dry completely before I apply the Por 15. While the carpet is out I want to either dye it black or clean it with folex. I am going to apply undercoat to the wheel walls as well. I am going to take a pictures of this whole process and let you know the results after a few days. I am going to do this project in three phases...

Wednesday (Trunk)

Friday (Inside)

Saturday (Wheel Walls)

Parts/Products:
. Por 15
. Undercoat
. Roller
. Sandpaper (What grit would you recommend)
. Masks
. Masking tape
. Towels
. Simple Green
. Gloves

If anyone has done this project before and has any recommendations or tips I am all ears

i need to do the same thing to my car can wait to see her all done

What do you think?