ugrade to your coolant?
 

Just saw this on another forum, but what are the benifits (if any) running something like this in a 3.8 vs regular or dexcool coolant?

http://www.evanscooling.com/main25.htm

DEX is hard on gaskets, as we have seen in the S2's with the plastic LIM gaskets

This coolant appears to have good qualities to reduce heat. Our engines are very good at creating heat. Maybe with the known intake gasket leaks and what not, this may be a viable solution? A nice helper for modding possibly too? I would be interested to see operating temps before and after as well as KR readings at WOT.

For our capacity, you're talking over 100 bucks. That would take some pretty good proof to get me to go for it.

man, $100+ for coolant would be outrageous! :shock:

unless they can gurantee it'll never go bad or leak :roll:

How about use in an intercooler system? Less volume of fluid.

There's only really like 4 intercoolers here.....I'd pitch it on CGP first...more Intercoolers, and they'll buy anything LOL

500,000 miles, damn, would the radiator and motor last that long??

I know a 4.3 liter would...seen a few hit over that...the radiator....prolly not so much lol

evens
 

We used the evens in our race cars it works great but it 125.00 for coolant too rich for
your race cars.... So we use Peak antifrezze with Red Line Water Wetter Insted ...
Some Results Basically :D