quick question on rear o2 sensor
#1
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2006
Location: PA
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
quick question on rear o2 sensor
ok so after putting headers on her, i had to extend the 02 sensor wire about 6 inches, i tried to use the same gauge and resistant wire put it still seems off, any ideas on this? also hooking up an air/fuel gauge makes a different signal to the computer and at idle the rpm'* go up and down, i know it has to do with the wiring and the wires resistant, so does anybody know what the wires resistant are (in-case i measured wrong)?
#2
Senior Member
Posts like a Corvette
Join Date: Jun 2008
Location: Cleveland, OH
Posts: 1,389
Likes: 0
Received 0 Likes
on
0 Posts
I read that you can't splice O2 sensor wires because they use the wires for a free air refrence somehow, might have to get a new sensor and the premade extensions
#8
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2006
Location: PA
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
cant find an extension anywhere
Last edited by billythekid; 06-17-2010 at 10:20 PM. Reason: i think i found one on jegs....http://www.jegs.com/i/Caspers+Electronics/182/109010/10002/-1
#9
Senior Member
Posts like a Turbo
Thread Starter
Join Date: Feb 2006
Location: PA
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
zigmeisterxiv
1992-1999
1
02-10-2010 07:42 PM