I'm looking to get a 180 t-stat for my 94 SSE but the pepboys parts guy was clueless I guess. Does anyone know where I can get the specific 180 tstat for my car? Anyone have a part #? Thanks

I got one from www.grandprixstore.com. I know you can get them from some auto parts store but you can also check with a dealer to see if the '94 and the '95 used the same one. If they do, you can use the one in the above link.

THANKS. The hypertech 180 right? Do those Borla exhaust tips on that site fit a 94 SSE??

Yup, the hypertech.

The tips I am unsure of. I know on mine has an oval shaped pipe on it. You will just need to go measure the opening and compare the inlets on the Borlas. For the most part, they are generic application.

If u have a dual outletr muffler ul need 2 1/4 inch borlas tips i bought the 2.5'*(inlet) and they welded them to fit so if u get 2.5'* they will work fine i have single angle cut intercooled tips they look decent but i might take em off and get the stock ovals chromed.
i ahve some pics on my webpage if you want to see wht they look like up close.
also your local NAPA autoparts store has ur thermostat instock also graba rubber gasket while ur there. then drill 3-4 holes into the thermo to let the coolant flow early 1/16th size my cars runnign dam cool n good too. hth

Kragen has em too. cheap and no shipping cost.

Ty